電纜橋架廠家交流之一

     云南惠博橋架師傅通過多年的工作經驗和研究指出當前傳統鋼制電纜橋架存在的很多端，然后向大家介紹新型電纜橋架廠家的新發展思路：通過采用橋架新材料和結構， 優化電纜橋架加工工藝， 不僅克服傳統電纜橋架的弊端，還延長橋架產品使用壽命。

    當前昆明電纜橋架市場堪憂， 由于電纜橋架廠家增多，然而建設各方過分為了追求利潤最大化，一般實行低價中標，往往出現低于成本價中標，使得電纜橋架企業的微薄利潤只能靠偷工減料來實現，劣質鋼制電纜橋架比比皆是，規范、標準很難得到執行。

     面對國內傳統橋架廠家存在的問題，唯一辦法是優化橋生產結構、 降低材料消耗。 纜橋架制造企紛紛行動，優化設計，以薄壁構件替代平板結構。
    部分電纜橋架廠家率先使用彩色涂層鋼板為原材料，在電纜橋架制作中材料經過多次彎曲、擠壓、延伸，產生了冷作硬化， 相當于增加了橋架板材的厚度，抗彎、抗扭及穩定性均有所提高，同時提升了整體橋架的剛度，大大提高構件受力性能。
    電纜橋架廠家之所以彩鋼電纜橋架的另一關鍵點因素是無損加工工藝，輔助全新橋架工裝，使整件產品在延壓、折彎等全工序中確保表面涂層完好無損。

One of the communication of cable bridge manufacturers

Through years of work experience and research, the master of Yunnan Bo super bridge points out the many ends of the traditional steel cable bridge, and then introduces the new development idea of the new cable bridge manufacturer: through the adoption of the new material and structure of the bridge, the processing technology of the cable bridge is optimized, not only to overcome the disadvantages of the traditional cable bridge, but also to prolong the service life of the bridge.

At present, the market of cable bridge in Kunming is worrying, because the number of cable bridge manufacturers is increasing, but the construction parties are too much to pursue the maximization of the profit. Generally, the low price winning bid is generally carried out. It often appears below the cost price, making the thin profit of the cable bridge enterprise can only be realized by cutting off the material, and the inferior steel cable bridge is abound, and the standard and standard are difficult to be implemented.

Facing the existing problems of the traditional bridge manufacturers in China, the only way is to optimize the production structure and reduce the consumption of materials. The cable and bridge manufacturing enterprises have taken actions to optimize the design and replace thin-walled structures with thin-walled components.

Some cable bridge manufacturers take the lead in using color coated steel plate as raw materials. In the production of cable bridge, the material has been flexed, extruded and extended many times, producing the cold hardening, which is equivalent to increasing the thickness of the bridge plate, improving the bending, torsion and stability, at the same time, the rigidity of the integral bridge is raised and the force performance of the component is greatly improved.

The other key factor of the cable bridge manufacturer of cable bridge is the nondestructive processing technology, which helps the whole product to ensure that the surface coating is intact in the whole process of extension and bending.